Making your carpet last for a long time requires time and effort. It will be a foolish act if you don’t perform proper maintenance of the carpet. Nobody wants to ruin their carpet, so if you want your carpet to always be top-notch, you are not alone.
Shampooing the carpet is a very good idea when it comes to your carpet’s maintenance. If you already own a carpet cleaner but don’t know how to use a carpet shampooer, we are leaning forward to saving you. We have prepared the step-by-step guideline for you to follow and clean your carpet with the least effort.
Without any further ado, let’s get right into it to see what we have in store for you. Surely, we will share a lot of information about other concerns as well!
How to Use A Carpet Shampooer?
Carpets were never an easy deal. But if you intend to make your carpet last for years then you have to be committed to maintaining it properly.
Just like other stuff in our sweet home, a carpet needs proper care and regular cleaning. But let’s face it, no matter how expensive a shampooer you’ve purchased if you don’t know how to use that then we can admittedly say that you’ve wasted your money.
However, almost all carpet shampooers can be used with the same method. So we’re going to help you today and make you learn the steps of using a carpet shampooer. Let’s get started with the point.
Step-1: What to do beforehand
Before actually starting with the shampooer you need to prepare the area you’re going to vacuum. Otherwise, the shampooer goes down with the very first session even though you don’t get a clean carpet so far.
So what you’ve to do is clean the surface dirt, grime, and dust as much as you can with a powerhead vacuum cleaner first to get more effective results from the shampooer.
Step-2: Starting with the shampooer
A shampooer is unlike a vacuum cleaner. It isn’t used by pulling it back and forth. However to clean your carpet with the carpet shampooer first take the tank out and fill it with water. If possible use hot water since that makes the cleaning 2x effective. On the back of the tank, you will see the levels of water.
Step-3: Prepare the solution
You can mix any kind of cleaning solution with water in the tank. Most people use the solution that comes with the shampooer but it would be better if you use extra detergent, soap, shampoo, or any other effective cleaning solution.
Put your favorite cleaning solution into the tank through the hole at the top. Once you’re done, put the cap back. Lastly, shake the tank and give the whole deal a good mixing.
Step-4: Start cleaning
Put the tank back into its place. Connect the cleaning pipe which has a brush on one side to the main machine. Plug the machine, turn the power button on and start cleaning. The brushes of the shampooer clean all the dust and grime.
If you have pets at home, you can use deterrents alongside to get rid of the nasty smells. A dog deterrent spray for carpets can save you a lot of time if you are a dog owner.
You will be surprised to see how quickly a shampooer kicks a stain out of your favorite carpet. However, once you’re done with the cleaning, trust us, cleaning using a shampooer is too satisfying.
Things to remember
Don’t use excess shampoo or cleaning solution. The excess shampoo is hard to clean out. Eventually, the excessive amount of shampoo will start attracting even more dirt, grime, and dust.
It’s legitimate to think about the process that a shampooer uses while cleaning your favorite carpet. Have you found the appropriate answer yet?
We think we could give you one. So a shampooer by and large uses a combination of cleaning solutions to deal with the crazy dirt, grime, and dust stuck on your favorite carpet.
A shampooer comes with powerful scrubbing brushes and heavy-duty suction power. The brushes inject the cleaning solution deeper into your carpet fibers and start scrubbing the carpet gently as well. Brushes work for agitating, scrubbing, and loosening the dirt and dust on your carpet.
If you’re worried about those stupid stains then let us ensure you that those strong and efficient brushes from your shampooer will kick the stain out in a few seconds. They are made in a way that they work effectively on stains.
Lastly, the heavy-duty suction lifts all the stain, dirt, and grimes away. And what you’re left with is a clean refreshing carpet that doesn’t stink and doesn’t hurt your, your kid’s, or your pet’s skin with allergies, after all, cleanliness is godliness.
Frequently Asked Questions (FAQs)
1. Should you rinse the carpet with water after shampooing?
The extra detergent that is left in a carpet, can serve as a magnet for new dirt. That’s why you need to use clean water to remove the excess detergent after shampooing the carpet; especially in heavy traffic areas like stairs and walkways.
Using water after shampooing can help to remove excess shampoo and preserve those areas tidier for longer.
2. Should the carpet be vacuumed after shampooing?
It’s your call actually, it helps to dry off the carpet quickly. But you should always vacuum first before shampooing! A thorough vacuuming before shampooing can get rid of all the extra dirt from your carpet and make it easier for you to clean it.
3. Is it best to clean the carpet with hot or cold water?
If your carpet has a lot of dirt, cleaning it with hot water will be a wise decision. But you can avoid it if you are attempting your regular cleaning. Make sure to use warm water- not too hot water. Too much hot water can melt your carpet cleaner.
4. How often should you shampoo the carpet?
Normally, you should clean your carpet at least once a year to remove dust, dirt, and allergens. But the necessity of cleaning may differ depending on different situations. For instance, if you have children or pets, you might shampoo your carpets more frequently than others.
5. Can you shampoo your carpet too much?
You should shampoo your shampoo once every year, and if you have pets at home, you can increase the number by 1-2 times. But shampooing the carpet more often can damage the fabric and make it less durable.
6. Why does my carpet feel sticky after shampooing?
Excess soap residue in the carpet after shampooing can make the carpet feel sticky to walk on. It can even feel stiff, hard, or “crunchy”. To avoid it, rinse the carpet with water after shampooing and dry it off properly.
Now you know how to use a carpet shampooer properly. Shampooing your carpet can be very beneficial to keep it good for years. Now you know how to do it, you can perform the procedure perfectly and make your perfect look like a new one always.
If you use your carpet daily, then the carpet should be cleaned at least once or twice every year. You may need to increase the cleaning if you are a pet owner. Remember all our given tips and suggestions to have the best experience with shampooing. Good luck!