How to Get Highlighter Out of Carpet | Step by Step Solution
Usually, children love to play with colors. All the bright, colorful, shiny, and sparkling items are especially attractive to children. As a result, you will find different colored stains in your home on the walls, floor, carpet, and even bedding. If you have children, it is entirely possible to find highlighter stains on the carpet. Sometimes highlighter stains on the carpet become too tough to remove.
However, colors can often turn into stains, but it doesn’t mean you will not allow your kids to play with them. That’s why you should find out the way to clean color from various surfaces instead of stopping playing with colors for the kids. Well, there is nothing to worry about. Here we will show you the correct way how to get highlighter stain out of the carpet.
Take prompt action against the stain
Removing highlighter stains on the carpet is quite annoying and time-consuming work. But if you can act fast when the stain is fresh, then it will be easy to deal with it. The minute you identify an open highlighter on the carpet, just grab some paper towels to blot the area before it can dry completely. Take another wet paper towel to your other hand. Carefully alternate between dry and wet paper towels to get most of the color out of the carpet.
If you can do this job as your first step, you will successfully remove most of the color from the carpet. You can go for this step even if the color is dry because your better try can remove color stains by about 40% before moving to any other cleaning method.
How to get highlighter stains out of carpet
If it is your first attempt at removing a highlighter from the carpet, you may need to learn some correct methods and proper guidelines for doing your job without any mistakes. Here are some easy cleaning methods.
Gather cleaning supplies
Before you start your cleaning, you need to gather all the cleaning supplies. It will help you to drive your work smoothly. You will need-
- Some paper towels
- Mixing bowl
- White vinegar
- Dish soap
- Several lint-free white cleaning cloths
- Liquide laundry soap
- Rubbing alcohol
First cleaning method
This method will use white vinegar and dish soap to remove highlighter, but you can apply it to remove other stains from the carpet.
- Make a cleaning solution: Take a bowl and pour two cups of cold water. Add one tablespoon of both white vinegar and liquid dish soap. Mix them well and make an effective cleaning solution. Take a clean cloth and damp it into the solution.
- Soak the stain: Now press the wet cloth on the ink. This damp cloth will release some water into the carpet, which will let the color absorb into the cloth instead of the carpet. You just need to make sure that water should not soak in the surrounding area as it can spread the ink. When you use the wet cloth, you should fold it so that it can absorb a minimum amount of water. You might need this step to repeat for 5 to 10 minutes.
- Dry the affected area: Use a dry white clean cloth and blot the stain. This cloth should be lint-free. Remember that you have to turn the cloth from frontward to backward over the spot so that you can avoid putting the color back on the carpet.
- Rinse the carpet: Rinse the wet cloth with clean water and squeeze out the excess moisture. Again clean the spotted area with a wet cloth to remove if there is any soap residue.
- Remove excess water: Use another dry cloth and cover up the entire treated area until you have soaked up the excess moisture in the carpet.
Second cleaning method
- Try Out Rubbing Alcohol: If the soapy solution doesn’t remove the highlighter, you can always try rubbing alcohol. However, you want to test an inconspicuous area of your carpet before trying this as rubbing alcohol can stain certain surfaces and carpets.
- Treat the stain with rubbing alcohol: If your test has proven safe for your carpet, then it’s time to try rubbing alcohol to lift the stain. You can do this by pouring a small amount onto a paper towel to dab the dye. However, if your stain is large and saturated, you can pour the alcohol directly onto the stain.
- Rub the area with a paper towel: After you’ve dabbed or poured the solution, rub the carpet fibers with a moderate amount of pressure. Make sure you check the paper towel frequently to see if any ink is lifting. If it is, grab some new paper towels and continue so that you avoid pressing ink back into the carpet.
- Wash the area: Now, you will need to grab a bowl and mix a few drops of liquid laundry detergent into two cups of cold water. Soak up a lint-free white cloth with the solution and scrub the stain. This will help to remove the rubbing alcohol as well.
- Mark the stains: Now it’s time to grab your safety pins and press them into the middle of the stain or stains that you just treated. You’ll want to let your carpet dry for about an hour.
- Check your stains: After your carpet has dried a bit, check the spots where you stuck your safety pins. If the stain is still there, you can feel free to repeat the above steps to lift even more ink.
- Dry the area: After you’ve lifted all the ink, grab a clean towel, and scrub your carpet until it’s relatively dry. You can also turn on a fan to quicken the drying process. If you’re scrubbing and you don’t feel you’re getting deep enough into the carpet, you can always use a soft bristle scrub brush as an alternative to a paper towel. Or you can scrub the stain with a rough textured washcloth.
Still, Having Trouble? Add Some Baking Soda
If nothing is helping to remove the stain altogether, you can add baking soda into the mixture.
- Create the solution: Add 2 tablespoons of both white vinegar and liquid dish soap to two cups of cold water. You’ll then want to put about 1 to 2 teaspoons of baking soda into your soapy solution. Mix it all until the baking soda is fully dissolved.
- Spray the solution onto the area: Fill a spray bottle with your mixture and apply liberally onto the site of the stain. You’ll want to make sure it’s thoroughly soaked, although do this after you’ve tried the above methods and removed most of the ink.
- Let it sit: Let the solution work its magic for about 10 to 15 minutes. Afterward, dab the area with a wet white cloth.
- Dry the area: Take a clean cloth, wipe the area until it’s damp, and then let it air dry the rest of the way.
Related post: How to remove washable marker from carpet
Frequently Asked Questions (FAQs)
1. How do you get a highlighter off the floor?
If the above methods don’t work, you can always try using non-abrasive toothpaste. Apply the toothpaste to the area and rub it in. Let it sit for about a minute, and then rub the rest of the toothpaste into the stain using a clean towel.
2. How do you remove old highlighter stains?
If you found your stain too late, it’s still important to blot the area with a wet paper towel or a cloth. This helps to lift the excess ink. Afterward, you can treat the stain with a liquid laundry detergent or a stain erasing solution.
You’ll then want to go over the area with some cold water and a rag to lift the soap out of the carpet, drawing up the rest of the ink.
3. Does lemon juice get rid of highlighters?
Lemon juice can help to make a highlighter stain almost undetectable. You can cut a lemon in half and put some of the juice onto a cotton swab or a cloth. Rub the cloth over the carpet and see if this helps the highlighter dull down a bit.
After trying these methods, the stain on your carpet should lift up, and the area should look as good as new! Ensure that you use lint-free white cloths so that inked lint doesn’t get between your carpet fibers, as this will defeat the entire purpose of removing the stain. The purpose of the white clothes is to allow you to see whether or not the ink is coming up.
If you find that these methods aren’t working, you can always add some baking soda to the vinegar mixture. This will cause a reaction with the vinegar, which will bubble the ink out of your carpet. When you’re finished, it’ll look like the accident never even happened.