7 Steps to Disinfect Carpet Without A Steam Cleaner

To avoid harmful viruses and bacteria, you need to properly disinfect essential parts, including your cozy carpet. Carpet is victim to mold, bacteria, organic compounds, insect husks, pet urine, dust, pet hair, and so on. All these things together can cause health risks to your beloved one. You may clean dust with a vacuum but it can’t disinfect the carpet. 

At present, a steam cleaner is very popular to disinfect the carpet without hassle. At the same time, they are quite expensive and need more power to operate. While trying to spot cleaning, maneuvering a stem machine is a hassle. 

Fortunately, we bring some effective methods to disinfect carpets precisely. These methods are budget-friendly and you can easily accomplish them. If you don’t have a steam carpet cleaner, then you must perform these techniques to keep your family members healthy.

How to disinfect carpet without the steam cleaner?

Carpet is common stuff that gets dirty and stained in a short period. Regular maintenance prolongs carpet longevity. But it is crucial not only to clean but also to disinfect the whole area. Kids and pets are very fond of playing on the carpet. If it is not hygienic, then there is a high chance of getting sick. 

Well, a steam cleaner is effective for disinfecting. Its high heating power and cleaning solution together kill germs, viruses, and bacteria. But everyone can’t afford an expensive steam cleaner. For this reason, you don’t neglect to disinfect the carpet. You should look for an alternative to steam cleaning. 

There are many commercial products that claim to disinfect the carpet, maybe they can. But here we focused on DIY techniques. We will give you the most inexpensive home remedy yet 100% practical defective solvent. Here is the process: 

Things you will need

  • A rag
  • White vinegar
  • Liquid dish soap
  • Water
  • A vacuum or soft-bristle broom.
  • A bucket
  • A scrub brush

Step by step instructions

Step 1: Remove dirt and debris

At first, you need to remove loose dirt and debris from the carpet. If there is any heavy furniture on the top of the carpet, remove them to disinfect the whole carpet. You can use a vacuum or broom. The vacuum will be easy to clean pet hair and other debris. 

In the case of a broom, pick a soft bristle and a dustpan. Brooming is a good way to clean if the carpet has a low pile. If you have high-pile and thicker fibers, then keep patience and sharp eyes to clean it thoroughly. You can take a flimsy broom to clean the debris like dirt and debris embedded in the fibers. If you want to make the broom strong bound, bind the bristles with a rubber band. 

Step 2: Make the disinfecting solvent 

This is super easy to make the disinfecting solution. Grab a bucket and fill it with half of the white vinegar and half cold water (lukewarm water also does the task well). Now add some liquid dish detergent to the mixture. Make sure the detergent is transparent in color. Mix all the content properly. Swirl the bucket or use a stick to mix them. When all ingredients will mix together, it becomes a foamy look. 

Step 3: Test the solvent

Vinegar and water mixture is widely known as a disinfecting and cleaning component. But this solution also can discolor the carpet. That’s why you should test the solvent on your carpet to see the result. Pick a small area or hidden spot and pour some solution and wait. This solution precisely cleans the carpet and works on many carpet fibers. So we are hoping, it will also work on your carpet.  

Step 4: Apply the solution

Take a scrubbing brush and make sure the bristles are soft enough for your carpet fiber. Dip it in the mixture of the bucket and start scrubbing the carpet. Don’t be aggressive and not let the fiber be oversaturated. Yet, give gentle pressure to remove stains and other dirt from the depth. Divide the carpet into sections so that you can clean it all the way thoroughly. When you are done scrubbing the whole carpet, leave it for some time to work the solvent and properly disinfect the carpet. It should take 10-15 minutes to work the disinfecting agents. 

Step 5: Rinse the Carpet

Take another bucket of clean cold water. Rinse a white microfiber rag and start rubbing the carpet fiber. Skip the scrubbing brush for rubbing. The microfiber rag will remove the bacteria and dirt that loosen while scrubbing with vinegar solution. Just like you scrub the carpet, rub it in the same process from end to end. Keep rinsing and rubbing it until the water gets dirty.  

Step 6: Dry the carpet

After finishing scrubbing and rubbing, it is time to dry the carpet. Always choose a sunny day to wash the carpet. Because there will be less humidity and the carpet will dry faster. Never use direct sunlight or heat to dry the carpet. Open the doors and windows to dry them naturally. You can turn on your fan to dry it faster. 

Recommended post: Best carpet dryer

Step 7: Use the Vacuum

You need to vacuum the carpet once again as there are still small particles, dirt, and debris remaining in the carpet. It also helps to remove all the residue from the cleaning mixture. Moreover, the carpet pile gets damp after rinsing with water. Vacuuming is the way to fluff the carpet fiber like a new one. Or you can use a comb to lift up the carpet fiber. 

Maintaining disinfected carpet

The process of disinfection the carpet takes a lot of effort. So you would want the effect to last longer. To avoid dirt or spills from the carpet. For quick disinfection, you can use the same vinegar solvent. Fill a spray bottle with the solution. Spray it when you needed, wait for some time, and vacuum the carpet. It is the easiest way to disinfect the carpet without a steam cleaner. 

Frequently Asked Questions (FAQs)

1. How to remove the vinegar smell from the carpet?

Vinegar is a strong material to disinfect the carpet but the smell may be irritating to someone. You can remove the smell with baking soda. After cleaning with vinegar, drizzle some baking soda on the carpet and wait for some time. Now, broom or vacuum the carpet, and surprisingly the smell of vinegar will be removed. Isopropyl alcohol is also used to remove the smell. Just saturate a rag with the alcohol and rub the carpet.

2. Does baking soda disinfect the carpet?

Baking soda is also effective to disinfect the carpet. For the carpet owner, it is the cheapest option to disinfect the carpet by hand. It also helps to remove odor and gives a fresh feel. To use the baking powder, you need to vacuum the carpet, sprinkle the baking powder all over the carpet, and let sit for a while. Then take a bucket of warm water, rinse a sponge to rub, then dry the carpet naturally. Thus, baking soda works for disinfection.  

3. Does vinegar sanitize the carpet?

Vinegar is a usual means to eradicate germs and bacteria from the carpet. In the laboratory, the germ-killing ability of vinegar is pretty impressive. Following the above rules, you can successfully sanitize the carpet.

Final Words

Before that, you must be confused about the disinfection of the carpet without a steam cleaner or you are preparing to rent a machine. But you need to mix up. We have given you the easiest way to disinfect the carpet. This process is also the most inexpensive way. By doing this simple task, you can keep your kids and family member safe and sound. While disinfection is an essential task, you must perform it whether you have a steam cleaner or not.

Leave a Comment